redgard fiberglass mesh tape- China Factory Manufacturers Suppliers

Fiberglass is an inorganic non-metallic material with excellent performance. It is made of pyrophyllite, quartz sand, limestone, dolomite, boro site, and boro site as raw materials through high-temperature melting, wire drawing, winding, weaving, and other processes. The diameter of the monofilament is several microns to twenty microns, which is equivalent to 1/20-1/5 of a hair, and each bundle of fiber strands is composed of hundreds or even thousands of monofilaments. Fiberglass is usually used as reinforcing materials in composite materials, electrical insulating materials and thermal insulation materials, circuit substrates, and other fields of the national economy.

Here is the content list:

• Material properties

• Main features of glass fiber

Material properties

Melting point: glass is a kind of amorphous, with no fixed melting point, it is generally considered that its softening point is 500~750℃

Boiling point: about 1000 ℃

Density: 2.4~2.76 g/cm3

When fiberglass is used as a reinforcing material for reinforced plastics, the biggest feature is its high tensile strength. The tensile strength is 6.3 to 6.9 g/d in the standard state and 5.4 to 5.8 g/d in the wet state. Good heat resistance, no effect on strength when the temperature reaches 300 ℃. It has excellent electrical insulation, is an advanced electrical insulation material, and is also used for thermal insulation materials and fire shielding materials. Generally only corroded by concentrated alkali, hydrofluoric acid, and concentrated phosphoric acid.

Main features of glass fiber

Compared with organic fibers, fiberglass has higher temperature resistance, non-combustibility, corrosion resistance, good heat insulation, and sound insulation, high tensile strength, and good electrical insulation. These characteristics make the use of glass fiber far more extensive than other types of fibers, and the development speed is also far ahead.

(1) High tensile strength and small elongation.

(2) High elastic coefficient and good rigidity.

(3) The amount of elongation within the elastic limit is large and the tensile strength is high, so the absorption of the impact energy is large.

(4) Fiberglass is an inorganic fiber, which is non-flammable and has good chemical resistance.

(5) Low water absorption.

(6) The dimensional stability and heat resistance are all good.

(7) Good processability, can be made into different forms of products such as strands, bundles, felts, and woven fabrics.

(8) Transparent and permeable to light.

(9) Good adhesion to resin.

(10) The price is cheap.

(11) It is not easy to burn, and can be melted into glass beads at high temperatures.

NANJING EFG, https://www.china-fiberglass.com/, is a dynamic, creative, experienced, and responsible team. Everyone on the team is committed to providing the best products and services to our customers. Our company has developed a wide range of fiberglass which are tested extensively before leaving the factory to ensure quality. As a professional manufacturer, we specialize in manufacturing the highest quality fiberglass. We have conducted a large number of tests before leaving the factory to ensure the quality. You can consider using our cost-effective products. Thank you for your time!

The glass fiber black felt adopts a thermosetting resin-based environmentally friendly formula adhesive to tightly bond the composite fibers, with good color fixation, high strength, wear resistance, and effective control of fiber scattering. Black fiberglass felt has excellent flame retardant, sound absorption and noise reduction, and thermal insulation effect. Anti-fouling and water-repellent, effectively avoid the growth and reproduction of various microorganisms, anti-bacterial and anti-mildew. Especially suitable for high-speed, high-speed rail sound-absorbing barriers, perforated sound-absorbing panels veneer, good light absorption, and zero reflection.

Here is the content list:

• The role of Black fiberglass

• Advantages and applications of Black fiberglass felt

• Please rest assured to choose NANJING EFG

The role of Black fiberglass

Black fiberglass is compounded on a glass wool board, which is a special material for heat preservation, sound absorption, and noise reduction. It acts on the lining of the glass wool air duct, absorbs the noise of the air duct system, reduces the loss of heat and cold on the air duct wall, and can meet the requirements of reducing energy consumption. requirements, greatly improving the indoor acoustic environment quality. It is especially suitable for environments with high mute requirements to improve sound quality and speech intelligibility. Such as high-end hotels, office buildings, clubs, and so on.

Advantages and applications of Black fiberglass felt

1.Antibacterial and mildew proof, the fiber is not easy to fall off.

2. Flame retardant.

3. Sound absorption, noise reduction, sound insulation, and thermal insulation performance.

4. Waterproof, oilproof, antifouling.

Used as high-speed rail, high-speed rail with sound-absorbing barriers, and perforated sound-absorbing panel veneer. Black fiberglass felt can also be used as air conditioner insulation panel veneer/glass wool panel veneer/ceiling back panel/solar flat panel heat collector panel veneer.

Please rest assured to choose NANJING EFG

As an expert in glass fiber and non-woven materials, NANJING EFG started in 2006 and established the vision of "building an internationally renowned brand" in the field of glass fiber and non-woven materials.

Every employee of NANJING EFG incorporates this belief into their daily work and life. When you work with NANJING EFG, you will find that you are working with a professional team whose service is positive and efficient, with consistent quality and an unforgettable reputation.

NANJING EFG was established to meet various needs of wallboard, thermal insulation, reinforcement, insulation, filtration, surface treatment, decoration, paving, waterproofing, glass fiber reinforced plastic, electrical and electrical, etc., with fiberglass and non-glass fiber as the base material for woven materials. NANJING EFG has a well-trained and experienced technical team focused on providing "tailor-made" product and service solutions. NANJING EFG ensures the best product performance for your business at the lowest total cost. NANJING EFG's professional service team will provide you with high-quality products and efficient services on time.

If you are interested in purchasing fiberglass, visit our website: https://www.china-fiberglass.com/to get more professional information about fiberglass. We will welcome you with high-quality products and good service as well as low prices! To provide comprehensive technical support to our customers, we will provide technical and other related information promptly upon request.

                                         Why is fleece used in fiberglassing.

1. It is a reinforcing material

In the process of GRG production, gypsum slurry and glass fiber are used alternately, layer by layer. The glass fiber helps to strengthen the firmness of the gypsum block and prevent the gypsum from being scattered after solidification.

2. It has high temperature resistance

It has been tested that when the temperature reaches 300°C, it has no effect on the strength of the glass fiber

3. It has high tensile strength

The tensile strength of glass fiber is 6.3~6.9 g/d in standard state and 5.4~5.8 g/d in wet state.

4.It has good electrical insulation

Glass fiber has excellent electrical insulation and is an advanced electrical insulation material. It is also used in heat insulation materials and fire shielding materials.

5. It is not easy to burn

Glass fiber can be melted into glass beads at high temperature, which meets the requirements of fire prevention and control in the construction industry.

6. It has good sound insulation

The combination of glass fiber and gypsum can achieve a good sound insulation effect.

7. It’s cheap

Regardless of the industry, cost control is the most important link, and products with high quality and low price will definitely be favored.

Well, the above are the seven advantages of why glass fiber can be widely used in the construction industry. Glass Fiber is a very good substitute for metal materials.

The need of every household and a must in every building construction, fiberglass tissue has been the talk of the town for ages. But what does it do? What is it used for? Let us help you put a full stop to your pondering! Fiberglass fleece is a fine matting that is similar to tissue paper. It is produced from glass fiber, be widely used in FRP composite surface applications and ensures smoothness and a clean look of colour to the surface. That isn't it; it also helps thermal resistance and ensures the durability of the product.

Fiberglass: Uses

Having diversified uses, this fiberglass veil acts as an excellent fiberglass pipe wrapping tissue. It is used for pipe insulation to ensure the correct temperature of water flowing through. Secondly, it is also a fantastic choice for roofing tissue. It is used to produce bitumen membrane or bitumen shingles – whatever serves the purpose well. Moreover, it is also used as a fiberglass floor tissue that produces PVC floors.  Apart from this, this is also an incredible choice for creating PVC carpets with long-lasting durability.

Coming over to its uses as a surface tissue, this is a go-to choice for many builders. Wondering why? As it is used for the surface treatment of Fiber Reinforced Plastic products. There's more to it – the fiberglass facing tissue can be used for internal wall decoration without worrying about leakage issues. Talking about wallboards and wallpaper choices, this fiberglass wallpaper and fiberglass facing tissue for wallboards are abundantly used to cover wallboard and internal wall decoration. Covering up acoustic boards is an issue in most households as well as buildings. This serves that purpose well too. Go for Fiberglass Acoustic Mat as it can be easily used as a surface layer of the acoustic board. The reason being that it is coated with CaC03 compound through a particular treatment.

Further, over to its battery use, this fiberglass battery separator tissue can be used as a lead-acid battery separator. Also, the commonly available black tissue is an excellent choice for thermal insulation. It can be for different materials; it serves as an insulation tape or insulation board, both. Lastly, fiberglass yellow tissue is also a good choice. It is widely being used as thermal insulation material to cover up the surface of the mineral wool board.

Glass Fiber Mat: Qualities

· Cost-Effective

· Corrosion Resistant

· Excellent Strength

· It comes with an amazing strength to weight ratio

· Has high heat distortion temperature

· The incredible quality of being electrically non – conductive

· Ability to be moulded to precise tolerances

Fiberglass insulation is one of the most popular ways to keep your home warm. Since it's inexpensive, easy to find, and very dense, you can't go wrong with padding your walls. However, it's very squishy, so you might be a little confused about how to cut it. This is a very abrasive material that requires a sharp blade and some safety gear such as a dust mask and glasses. However, with some basic techniques, you can cut insulation board safely and efficiently.

1. Measuring insulating materials

   Choose a piece of plywood that is at least as wide as the fiberglass board. Place it on a flat surface so there is enough room to spread out the fiberglass. The plywood doesn't have to be too big, just make sure it fits underneath the part you're cutting. [
   

   Choose a sturdy piece of material, such as a piece of old plywood

   You can put plywood on the floor for protection.

   Avoid cutting bare surfaces such as concrete.

2. Wear cut-resistant gloves and other protective clothing. Fiberglass insulation is skin irritating, wear long pants and a long-sleeved shirt. Then, put on gloves, and some also wear disposable coveralls to prevent the insulation from spreading onto their clothing.

   If part of your skin is exposed, apply some baby powder on it. The powder prevents glass shards in the insulation from sticking to the skin.

3. Wear a dust mask and safety glasses for protection. A regular N95 cloth dust mask will do just fine, if the mask you're using doesn't cover your eyes, buy separate glasses. Wear safety gear whenever cutting insulation.

   The dust released by the insulation is harmful and can aggravate breathing problems such as asthma.

   If you can, work outside so that dust doesn't settle in your home.

4. Unroll the insulating paper face down. Fiberglass insulation is rolled into a roll. Place the roll over the edge of the plywood. Then, push it through the plywood. Spread out just enough to make the cut you want to make.

   Most insulation has a paper backing on one side. It's usually easier to cut the paper last, and the backing keeps the insulation clean when you unroll it.

5. Use a tape measure to determine where you will cut the insulation. Start by measuring where you plan to install the insulation. Plan to cut the insulation 1 inch (2.5 cm) larger than the insulation on all sides. Because fiberglass insulation is flexible, it can be tucked into tight places. The extra length will help it stay in place.

6. Mark the measurements on the insulator with a permanent marker. Use a tape measure to transfer the measurement to the insulator. Measure along both sides of the insulation, making small marks to indicate where you plan to cut.

   If you roughly cut the insulation to approximate size, you don't need to take any additional measurements. If your goal is a precise cut, you can use a piece of sawdust to make a straight cut in most cases.

Glass wool is a plate-shaped product that is processed by centrifuging molten glass into fibers and solidified by adding an environmentally friendly formula binder based on thermosetting resins. The slender glass fiber has a low thermal conductivity and can trap air well, thereby playing the role of thermal insulation, sound absorption and noise reduction, and safety protection. The glass wool board series has the characteristics of tight and firm material, smooth surface and strong pressure resistance, and the appearance is more crisp and beautiful after installation.

Glass wool can be mainly used in: roof insulation, cold insulation, sound-absorbing materials; building insulation, cold insulation; entertainment venues, theaters, TV stations, radio stations, laboratories, sound-absorbing treatment; air-conditioning pipeline freezing and heat insulation of refrigerated warehouses.

It can be processed into glass wool felt according to actual needs, saving space, reducing costs and avoiding unnecessary waste.

The sound absorption characteristics of centrifugal glass wool are not only related to thickness and bulk density, but also related to factors such as cover material and structural structure. In construction applications, it is also necessary to take into account many aspects such as cost, appearance, fire prevention, moisture resistance, dust resistance, and aging resistance.

In large spaces such as gymnasiums and workshops, in order to absorb and reduce noise, sound-absorbing bodies with centrifugal glass wool as the main sound-absorbing material are often used. Sound-absorbing bodies can be made into plates, columns, cones or other special-shaped bodies according to requirements. , The sound-absorbing body is filled with centrifugal glass wool, and the surface is wrapped with a sound-transmitting surface layer. Since the sound-absorbing body has multiple surfaces for sound absorption, the sound absorption efficiency is very high.

In the road noise barrier, in order to prevent noise reflection, it is necessary to take sound absorption measures on the side facing the vehicle, and centrifugal glass wool is often used as the filling material, and the surface layer is a barrier plate made of perforated metal plate. In order to prevent glass wool from absorbing water and getting damp outdoors, it is sometimes wrapped with PVC or plastic film.

Please contact fiberglass@njefg if necessary.fiberglass

Fiberglass veil is mainly used as electrical insulation material, industrial filter material, anti-corrosion, moisture-proof, heat insulation, sound insulation, shock-absorbing material, and can also be used as reinforcement material. Fiberglass veil is used more widely than other types of fibers to make reinforcement Plastic, fiberglass veil or reinforced rubber, reinforced gypsum and reinforced cement and other products. Fiberglass veil coated with organic material glass fiber can improve its flexibility, used to make packaging cloth, window screen, wall cloth, covering cloth, protective clothing And insulation, sound insulation materials.

What are the classifications of glass fiber yarn?

Roving, roving fabric (ripstop), fiberglass mats, chopped strands and ground fibers, fiberglass fabrics, combined fiberglass reinforcements, fiberglass wet-laid mats. Author: Zhenjiang Anzhidun Fireproof Cloth https://www.bilibili.com/read/cv15256416/ Source: bilibili

This product consists of a two-inch thick vinyl-coated fiberglass-cloth-faced quilted fiberglass that is bonded to a one-pound per sq. ft. reinforced loaded vinyl noise barrier. ... Cementitious Wood-Fiber Engraved Design Acoustic Ceiling and Wall Panels Envirocoustic? Wood Wool Designs panels lead the acoustic panel products category with ...

Texturized Fiberglass Fabric is made by texturized yarn with high temperature resistance, high strength after puffing process. Texturized Fiberglass Cloth is a new type of fabric developed on the basis of continuous glass fiber filter cloth. Features: Resistant to ozone; Heat insulation and preservation; Higher working temperature; Electrical ...

Polyester spunlace nonwoven fabric is made of polyester fibers. High-pressure micro-fine water is sprayed onto one or more layers of fiber webs so that the fibers are entangled with each other and the web is reinforced with a certain strength, which is polyester spunlace nonwoven fabric. It is a relatively low-end product in the spunlace ...

S Glass Direct Size Fiberglass - Australian Made 4oz.

Fiberglass Mesh Under Tile Manufacturers, Factory, Suppliers From China, 86-18126537057 . amber.zhu@qjfiberglass . English. Home; About us. Why choose us; Products. Fiberglass Yarn and Roving. C-Glass Fiber Yarn

China Manufacturer with main products:the black fiberglass mat , warm keeping felt , veneering , floor mat , the roof of the room mat , filtering reagent mat , chopped strand mat ,. ... E-glass fiber mat as the strength mat, strengthens the shear strength and surface toughness, grantees the abrasive resistance and whether season. ...

Cem-FIL 62 chopped strands are packed in individual plastic bags, water-dispersible paper bags and carton boxes. Cem-FIL 62 chopped strands should be stored away from heat and moisture, and in their original packaging.

Carbon fiber fabric is the best choice if the part must have very high strength, high stiffness at the lowest possible weight. CST Unidirectional Carbon Fabric is available in a wide range of weights, widths and binders. Starting with an ultra light weight