Tel: +86-25-52270147      Whatsapp:+86-18851651909  



Share to:

Spunbond nonwoven

Used for household

Spunbond non wovenis a fabric-like material made from staple fibre (short) and Long fibers (continuous long), bonded together by chemical, mechanical, heat or solvent treatment. The term is used in the textile manufacturing industry to denote fabrics, such as felt, which are neither woven nor knitted. Some non-woven materials lack sufficient strength unless densified or reinforced by a backing. In recent years, non-wovens have become an alternative to polyurethane foam. Spun bonding is one of the most popular methods of producing polymer-laid

nonwovens. This process is based on the melt spinning technique. The melt is forced by spin pumps through a spinneret having a large number of holes. The quench air ducts, located below the spinneret block, continuously supply the conditioned air to cool the filaments. There is also a continuous supply of auxiliary room temperature air. Over the line's entire working width, ventilator generated under-pressure sucks the filaments and mixed air down from the spinnerets and cooling chambers.

spunbond non woven Medical hygiene
spunbond non woven Agriculture
produce nonwoven


1. Lightweight

2. Soft

3. Water repellent and breathable

4. Non-toxic and non-irritating

5. Antibacterial and anti-chemical agents:

6. Antibacterial properties.

7. Good physical properties.

8. environmental friendly.

1. Medical hygiene: surgical gowns, caps, covers, plaster cotton wool, women's sanitary napkins, baby diapers, wet face towels, sanitary underwear, dust cover.

2. Agriculture: harvest cloth, greenhouse cloth

3. Industrial: floppy disk lining, speaker cloth, filter material, sound insulation felt, sealing ring lining, cable cloth, fiberglass reinforced towel, industrial wipes, shockproof liner, insulation material, tape base liner, pipe base liner, ventilation duct, Shapi cloth.

4. Packaging: composite cement bag, luggage lining, packaging base lining, quilt, storage bag, mobile jacquard luggage cloth.

Clothing and shoes: clothing lining, flakes, hard toe lining, heel lining, underwear, artificial deerskin, synthetic leather, warm shoe lining, cloth sole lining.

5. Automobile industry: waste textile insulation thermal felt, shockproof felt, roof, cushion lining, carpet, car door lining, automobile filter element, molded cushion.

6. Household clothing: sofa inner cloth, carpet, wall cloth, lens cloth, tea bag, vacuum cleaner filter bag, shopping bag, printed bed sheet, social cover, cushion, sleeping bag, dry cleaning cloth, scouring cloth, curtain, table cloth, The lampshade is covered with a film on the back of the Mito Mat.

7. Civil engineering, construction: reinforcement, reinforcement, filtration, linoleum base cloth, drainage board, roof waterproof material, railway, highway, embankment, water slope, port sound insulation, sewer, heat protection, separation, drainage.

Other uses: launch vehicle, missile head heat-proof cone, tail nozzle throat lining, high-grade money printing paper, space shuttle heat-resistant tile, map cloth, calendar cloth, artificial cloth, canvas, etc.

spunbond non woven
produce nonwoven
nonwoven facotry

Filaments spun by melting resin chips are spread on a net directly from a spinning nozzle and randomly deposited to form a web and then bonded in the form of a sheet through thermal bonding or by other means.

polyester nonwoven

A: Melt polymer chips(raw material).

B: Form filaments by spinning the molten polymer and stretching the molten filaments.

C: Separate and spread fiber bundles of many filaments, and lay down the fibers on a net to form a web.

D: Bind the fibers in the form of a sheet through thermal bonding and perform embossing.

E: Perform special in-line processing such as calendar processing.

F: Wind up the sheet.


Standard export packing for shipping.

1. Roll packaging: PE plastic film

2. Pallet packaging: Pallets should NOT be stacked in more than 2 layers.

Pallet is free of fumigation, fumigation certificate is available


This product should be stored in a dry, ventilated and rainproof place, with temperatures from 5℃to 35℃ and humidity between 35% and 65%. It is recommended to be kept in intact package when not used to avoid damp.


Materials in above table are the standard types Nanjing EFG CO., LTD is delivering to customers, if customer wants specific unit weight, tensile strength, roll width and roll length, Nanjing EFG CO., LTD can produce as per customer’s requirement, offer tailored service to customers from different countries.  

LoadingStandard export loading


Nanjing EFG CO., LTD. has delivered materials to USA, EU, Middle East, North Africa, South Africa, Asian customers with ensured quality and good feedback. Wiht rich experience for export and technical support, Nanjing EFG CO., LTD welcomes the cooperation with customers from all of the world.


Materials will be loaded into container in factory, then be delivered to the sea port, finally be shipped to Customer’s port by MSK, MSC, CMA, COSCO, YANGMING, APL,  etc.


After sales service

Nanjing EFG CO., LTD tracks cargo of every shipment till customer uses the materials, and offer any help for customer’s demand in any time.

Technical support

If customer meets any problem on technic, Nanjing EFG CO., LTD will supply relative knowledge to help customer find the best solution, and can send technician to customer’s factory for guiding if necessary.




Add: No.20, Jiangjun Ave, Nanjing, China.

Tel: +86 25 52270147      

Fax: +86 25 58321442 / 52255211  

Mob: +86 18851651909   

Whatsapp: 0086 18851651909  



 2021 NANJING EFG CO., LTD All rights reserved. Support by Leadong . Sitemap