Tel: +86-25-52270147      Whatsapp:+86-18851651909  
You are here: Home » Polyester » Spunbond Polyester Mat » Spunbond Nonwoven Polyester Nonwoven for Paving




Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

Spunbond Nonwoven Polyester Nonwoven for Paving

Used for household

Spunbond nonwovens are fabric-like materials made of short fibers (short fibers) and long fibers (continuous long fibers) bonded together by chemical, mechanical, thermal or solvent treatment. The term is used in the textile manufacturing industry to refer to fabrics that are neither woven nor knitted, such as felt. Some nonwovens lack sufficient strength unless densified or reinforced by a backing. In recent years, nonwovens have become an alternative to polyurethane foam. Spunbond is one of the most popular methods of producing polymer laid webs

non-woven fabric. 

The process is based on melt spinning technology. A spinning pump forces the melt through a spinneret with a large number of holes. A quench air duct located below the spinneret continuously supplies conditioned air to cool the filaments. There is also a continuous supply of auxiliary room temperature air. Over the entire working width of the line, the negative pressure generated by the fan draws the filaments and mixing air from the spinneret and the cooling chamber.

spunbond non woven Medical hygiene
spunbond non woven Agriculture
produce nonwoven


1. Lightweight

2. Soft

3. Water repellent and breathable

4. Non-toxic and non-irritating

5. Antibacterial and anti-chemical agents:

6. Antibacterial properties.

7. Good physical properties.

8. environmental friendly.

1. Medical hygiene: surgical gowns, caps, covers, plaster cotton wool, women's sanitary napkins, baby diapers, wet face towels, sanitary underwear, dust cover.

2. Agriculture: harvest cloth, greenhouse cloth

3. Industrial: Floppy disk lining, speaker cloth, filter material, sound insulation felt, sealing ring lining, cable cloth, glass fiber reinforced towel, industrial rag, shockproof lining, insulating material, tape base lining, pipe base lining, ventilation pipe, sand cloth.

4. Packaging: composite cement bag, luggage lining, packaging base lining, quilt, storage bag, mobile jacquard luggage cloth.

Clothing and shoes: clothing lining, flakes, hard toe lining, heel lining, underwear, artificial deerskin, synthetic leather, warm shoe lining, cloth sole lining.

5. Automobile industry: waste textile insulation thermal felt, shockproof felt, roof, cushion lining, carpet, car door lining, automobile filter element, molded cushion.

6. Household clothing: sofa inner cloth, carpet, wall cloth, lens cloth, tea bag, vacuum cleaner filter bag, shopping bag, printed bed sheet, social cover, cushion, sleeping bag, dry cleaning cloth, scouring cloth, curtain, table cloth, The lampshade is covered with a film on the back of the Mito Mat.

7. Civil engineering, construction: Reinforcement, reinforcement, filtration, linoleum base cloth, drainage board, roof waterproofing material, railway, road, embankment, water slope, port sound insulation, sewer, heat insulation, heat insulation, drainage.

Other uses: launch vehicle, missile head heat-proof cone, tail nozzle throat lining, high-grade money printing paper, space shuttle heat-resistant tile, map cloth, calendar cloth, artificial cloth, canvas, etc.

spunbond non woven
produce nonwoven
nonwoven facotry

Filaments spun by melting resin chips are spread on a net directly from a spinning nozzle and randomly deposited to form a web and then bonded in the form of a sheet through thermal bonding or by other means.

polyester nonwoven

A: Melt polymer chips(raw material).

B: Form filaments by spinning the molten polymer and stretching the molten filaments.

C: Separate and spread fiber bundles of many filaments, and lay down the fibers on a net to form a web.

D: Bind the fibers in the form of a sheet through thermal bonding and perform embossing.

E: Perform special in-line processing such as calendar processing.

F: Wind up the sheet.


Standard export packing for shipping.

1. Roll packaging: PE plastic film

2. Pallet packaging: Pallets should NOT be stacked in more than 2 layers.

Pallet is free of fumigation, fumigation certificate is available


This product should be stored in a dry, ventilated and rainproof place, with temperatures from 5℃to 35℃ and humidity between 35% and 65%. It is recommended to be kept in intact package when not used to avoid damp.


The materials in the above table are the standard models that Nanjing Infrige supplies to customers. If customers need specific unit weight, tensile strength, roll width and roll length, Nanjing Infrige can produce according to customer requirements, and provide tailor-made services for customers from different country customers.

LoadingStandard export loading


Nanjing EFG CO., LTD. has delivered materials to USA, EU, Middle East, North Africa, South Africa, Asian customers with ensured quality and good feedback. Wiht rich experience for export and technical support, Nanjing EFG CO., LTD welcomes the cooperation with customers from all of the world.


Materials will be loaded into container in factory, then be delivered to the sea port, finally be shipped to Customer’s port by MSK, MSC, CMA, COSCO, YANGMING, APL,  etc.


After sales service

Nanjing EFG CO., LTD tracks cargo of every shipment till customer uses the materials, and offer any help for customer’s demand in any time.

Technical support

If customer meets any problem on technic, Nanjing EFG CO., LTD will supply relative knowledge to help customer find the best solution, and can send technician to customer’s factory for guiding if necessary.




Add: No.20, Jiangjun Ave, Nanjing, China.

Tel: +86 25 52270147      

Fax: +86 25 58321442 / 52255211  

Mob: +86 18851651909   

Whatsapp: 0086 18851651909  



 2021 NANJING EFG CO., LTD All rights reserved. Support by Leadong . Sitemap