 |
| unit weight: | |
|---|---|
| Quantity: | |
NJEFG
Spunlace Non Woven is also called "jet-spun net cloth". The concept of "jet-spun net cloth" comes from the mechanical needle punching process. The so-called "jet spray net" is to use
high-pressure water to pierce into the fiber net, so that the fibers are entangled with each other, so that the original loose fiber net has a certain strength and complete structure.
The process flow is:
1. fiber metering and mixing
2. opening and removing impurities-mechanical messy carding into a web-fiber web pre-wetting
3. water needle entanglement-surface treatment-drying-coiling-inspection-packaging and
warehousing. The spunlace device uses high-speed and high-pressure water jets to spray the fiber web to rearrange and entangle the fibers in the fiber web to become a non-woven fabric with a complete structure and certain strength and other properties.
The physical properties of this kind of spunlace non-woven fabrics are different from common needle-punched non-woven fabrics. In terms of hand feel and performance, it is the only non-woven fabric that can make its final product similar to textiles.
CHARACTERISTICS
1. There is no extrusion of the fiber web in the spunlace process, thereby increasing the bulkiness of the final product;
2. No resin or adhesive is used, thereby maintaining the inherent softness of the fiber web;
3. The high degree of integrity of the product avoids fluffy;
4. The fiber web has high mechanical strength, which can reach 80% to 90% of the strength of the textile;
5. The fiber web can be mixed with any variety of fibers.
6. Can be compounded with any base fabric to make a composite product.
7. Products with various functions can be produced according to different purposes.
● soft, good drape
● good strength
● high hygroscopicity and quick wetness
● low fluffing
● appearance is similar to textiles
● no chemical additives
● washable
Spunlace Non Woven is also called "jet-spun net cloth". The concept of "jet-spun net cloth" comes from the mechanical needle punching process. The so-called "jet spray net" is to use
high-pressure water to pierce into the fiber net, so that the fibers are entangled with each other, so that the original loose fiber net has a certain strength and complete structure.
The process flow is:
1. fiber metering and mixing
2. opening and removing impurities-mechanical messy carding into a web-fiber web pre-wetting
3. water needle entanglement-surface treatment-drying-coiling-inspection-packaging and
warehousing. The spunlace device uses high-speed and high-pressure water jets to spray the fiber web to rearrange and entangle the fibers in the fiber web to become a non-woven fabric with a complete structure and certain strength and other properties.
The physical properties of this kind of spunlace non-woven fabrics are different from common needle-punched non-woven fabrics. In terms of hand feel and performance, it is the only non-woven fabric that can make its final product similar to textiles.
CHARACTERISTICS
1. There is no extrusion of the fiber web in the spunlace process, thereby increasing the bulkiness of the final product;
2. No resin or adhesive is used, thereby maintaining the inherent softness of the fiber web;
3. The high degree of integrity of the product avoids fluffy;
4. The fiber web has high mechanical strength, which can reach 80% to 90% of the strength of the textile;
5. The fiber web can be mixed with any variety of fibers.
6. Can be compounded with any base fabric to make a composite product.
7. Products with various functions can be produced according to different purposes.
● soft, good drape
● good strength
● high hygroscopicity and quick wetness
● low fluffing
● appearance is similar to textiles
● no chemical additives
● washable
